Views: 0 Author: Site Editor Publish Time: 2022-08-12 Origin: Site
When decorating a house that is close to the street and has poor sound insulation, we can install acoustic panels to enhance the sound insulation effect. PET Acoustic Panel is an ideal material for acoustic decoration and is sound absorbing, environmentally friendly, flame retardant, heat insulation, heat preservation, moisture resistant, mold resistant, easy to dust, easy to cut, easy to assemble, easy to construct, good stability, good impact resistance, independence, and good value for money. It is easy to cut, easy to assemble, easy to construct, has good stability, good impact resistance, good independence, and good cost performance. A wide range of colors is available to meet the needs of different styles and levels of acoustic decoration. If you want to use PET Acoustic Panel, you have to install it, so how do you install PET Acoustic Panel? Here is the content list.
Here is the content list:
Preparation for the installation of the PET Acoustic Panel
Construction of PET Acoustic Panel
Before installing the PET Acoustic Panel, we can prepare the relevant materials and tools according to the installation method. For example, if the panel is to be fixed to the wall using a keel, we need to prepare a light steel keel, acoustic foam, nails, glue, a steel ruler, a knife, and other relevant materials and tools. The PET Acoustic Panel should be inspected before installation so that it is not damaged or damaged. Next, we can use a broom and other tools to clean up the dust on the wall, if the wall is uneven you can use cement mortar for leveling. Next, we use a tool such as an ink bucket to pop out the keel installation position on the wall according to the design drawings.
Next, we place the keel in the appropriate position and use a nail gun to drive in steel nails to fix the keel to the wall. The spacing between the nails is generally around 60cm. In addition, there will be a cavity in the wall after the keel has been installed, so you will insert sound-absorbing wool into the keel cavity and gently press the wool to make it flat. After all the keel cavities are filled with sound-absorbing cotton, we can lay a layer of porous plasterboard on its surface. The plasterboard is placed on top of the keel and nails are used to attach the plasterboard to the keel.
The PET Acoustic Panel is made of impact-resistant material and is hot pressed. For this reason, it is important to use the same batch of PET Acoustic Panel as far as possible when purchasing, to arrange the PET Acoustic Panel before construction, adjust the color difference and then install it in the adjusted order. It is recommended that imported blades be used for cutting or edging. Due to the quality of the steel of the domestic blade, the blades are not sharp enough and have a short life span. When cutting PET Acoustic Panel, it is advisable to use a steel ruler or an alloy square as a ruler, not a wooden strip or a soft material as a ruler, to avoid large gaps or distortions caused by unstraight cut lines. To reduce the gap, the blade can be tilted inwards by 0.5mm to 1mm when cutting, so that the interface surface forms an internal bevel, which makes it easier for the panels to meet each other and reduces the gap.
Yu Heng has briefly introduced how to install PET Acoustic Panel. The PET Acoustic Panel can also be directly bonded to the wall, for more information on how to install it, please contact a professional. For more information on this subject, please visit https://www.yhacoustic.com/.
